Xylene

Xylene (179Kg) – 3T CHEMICAL

Xylene (179Kg) is a aromatic hydrocarbon supplied by 3T Chemical in 179 kg/phuy packaging for industrial applications. The product has insoluble in water; readily soluble in organic solvents.

PRODUCT INFORMATION / Introduced packaging: 179 kg/phuy. The product is a aromatic hydrocarbon. Acceptance criteria must be based on the COA of the actual batch delivered.

1. What Is XYLENE (179KG)?

Xylene (179Kg) (common names Xylene; Xylol; Dimethylbenzene, CAS 1330-20-7, formula C8H10) is a aromatic hydrocarbon. It appears as colourless, clear liquid with characteristic aromatic solvent odour and insoluble in water; readily soluble in organic solvents. The flash point is about ~25°C (closed cup). Introduced packaging is 179 kg/phuy; origin shown on the packaging: China / South Korea. Acceptance criteria must be based on the COA of the actual batch delivered.

2. Product Identification and Technical Data

Property	Information
Product name	Xylene (179Kg)
Common names	Xylene; Xylol; Dimethylbenzene
Type	Aromatic hydrocarbon
CAS No.	1330-20-7
EC No.	215-535-7
Chemical formula	C8H10
Appearance	Colourless, clear liquid
Odour	Characteristic aromatic solvent odour
Solubility	Insoluble in water; readily soluble in organic solvents
Flash point	~25°C (closed cup)
Packaging	179 kg/phuy
Origin shown on packaging	China / South Korea

2.1. Typical Commercial Specifications

Parameter	Typical reference
Boiling range	~137–144°C
Specific gravity (20°C)	~0.86–0.87
Flash point	~25°C (closed cup)
Freezing point	~-25°C
Viscosity (20°C)	~0.6–0.8 mPa·s
Aromatic content	≥ 98%
Water content	≤ 0.02%
Benzene content	≤ 0.1%
Other parameters	According to batch COA

TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.

3. Key Features

• Very strong solvency for resins and oils.
• Fast-to-medium evaporation.
• Cost-effective aromatic solvent.
• Broad compatibility with many paint systems.
• Stable during storage.

4. Applications

4.1. Paints and Coatings

• Solvent for alkyd, epoxy and PU paints.
• Thinner for paints and printing inks.
• Solvent for industrial and marine paints.
• Solvent for powder and industrial coatings.
• Thinner for oil-based and anti-rust paints.

4.2. Industrial Applications

• Raw material for producing terephthalic acid (PET).
• Solvent in the production of crop-protection products.
• Component of fuel additives.
• Solvent for adhesives, binders and cleaning agents.

4.3. Other Applications

• Cleaning solvent and thinner for adhesives and binders.

5. Instructions for Use

• Use according to the technical guidance of the manufacturer.
• Perform compatibility tests before large-scale use.
• Keep the container closed when not in use.
• Check labels before use.
• Do not mix with strong oxidisers.

6. Safety, Storage and Transportation

• Flammable; keep away from open flame and sparks.
• Wear safety goggles, gloves and protective clothing.
• Work in a well-ventilated area and avoid inhaling vapours.
• Store in a dry, cool place with containers kept closed, away from sunlight.
• Separate from strong oxidisers.
• Do not discharge into drains or water sources.
• Prevent static build-up during transport.
• If large amounts of vapour are inhaled, move to fresh air; if the product enters the eyes, rinse immediately for at least 15 minutes.

7. Selection and Acceptance Criteria

• Verify the COA of the actual delivered batch against the technical requirements.
• Check appearance, colour, clarity and visible impurities.
• Check container condition, seals, labels and traceability information.
• Review the SDS for storage and emergency handling.
• Check homogeneity, water-insoluble matter and batch-specific parameters.

8. Frequently Asked Questions