Trichloroethylene (TCE)

Trichloroethylene (Tce) (300Kg) – 3T CHEMICAL

Trichloroethylene (Tce) (300Kg) is a chlorinated solvent supplied by 3T Chemical in 300 kg/phuy packaging for industrial applications. The product has slightly soluble in water; readily soluble in organic solvents.

PRODUCT INFORMATION / Introduced packaging: 300 kg/phuy. The product is a chlorinated solvent. Acceptance criteria must be based on the COA of the actual batch delivered.

1. What Is TRICHLOROETHYLENE (TCE) (300KG)?

Trichloroethylene (Tce) (300Kg) (common names Trichloroethylene; TCE; Trichloroethene, CAS 79-01-6, formula C2HCl3) is a chlorinated solvent. It appears as colourless, clear liquid with mild characteristic odour and slightly soluble in water; readily soluble in organic solvents. The flash point is about Non-flammable (no flash point). Introduced packaging is 300 kg/phuy; origin shown on the packaging: China / Japan. Acceptance criteria must be based on the COA of the actual batch delivered.

2. Product Identification and Technical Data

Property	Information
Product name	Trichloroethylene (Tce) (300Kg)
Common names	Trichloroethylene; TCE; Trichloroethene
Type	Chlorinated solvent
CAS No.	79-01-6
EC No.	201-167-4
Chemical formula	C2HCl3
Appearance	Colourless, clear liquid
Odour	Mild characteristic odour
Solubility	Slightly soluble in water; readily soluble in organic solvents
Flash point	Non-flammable (no flash point)
Packaging	300 kg/phuy
Origin shown on packaging	China / Japan

2.1. Typical Commercial Specifications

Parameter	Typical reference
Boiling point	~87°C
Specific gravity (20°C)	~1.46
Flash point	Non-flammable
Viscosity (20°C)	~0.57 mPa·s
Purity	≥ 99.5%
Water content	≤ 0.02%
Acidity (HCl)	≤ 10 ppm
Non-volatile residue	≤ 10 ppm
Other parameters	According to batch COA

TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.

3. Key Features

• Very strong degreasing ability.
• Non-flammable, safe in operation.
• Fast evaporation with no residue.
• High density, easy water separation.
• Stable when a suitable stabiliser is present.

4. Applications

4.1. Metal Degreasing

• Degreasing of mechanical parts, electronic components and metals before plating.
• Degreasing of mechanical parts before plating.
• Cleaning of electronic components and circuit boards.
• Degreasing of metals before machining.
• Degreasing in industrial equipment maintenance.

4.2. Industrial Cleaning

• Precision cleaning solvent in electronics.
• Extraction solvent in industry.
• Equipment-cleaning solvent.
• Industrial equipment-cleaning solvent.

4.3. Chemical Intermediates

• Raw material for chemical synthesis (chlorofluorocarbons, HFCs).

5. Instructions for Use

• Use in closed equipment with a vapour-recovery system.
• Follow the technical guidance of the manufacturer.
• Check equipment and procedures before use.
• Check labels and shelf life before use.
• Do not mix with incompatible chemicals.

6. Safety, Storage and Transportation

• Vapours are heavier than air and may accumulate; work in a well-ventilated area.
• Wear appropriate goggles, gloves and respirator when handling.
• Avoid prolonged skin contact and vapour inhalation.
• Store in a dry, cool place with containers kept closed, away from direct sunlight.
• Keep away from high heat sources (may form toxic gases).
• Do not discharge into drains or water sources.
• Comply with regulations on the control of chlorinated solvents.
• If large amounts of vapour are inhaled, move to fresh air and seek medical attention.

7. Selection and Acceptance Criteria

• Verify the COA of the actual delivered batch against the technical requirements.
• Check appearance, colour, clarity and visible impurities.
• Check container condition, seals, labels and traceability information.
• Review the SDS for storage and emergency handling.
• Check homogeneity, water-insoluble matter and batch-specific parameters.

8. Frequently Asked Questions