Solvent D60
Solvent D60 158Kg as de-aromatised aliphatic hydrocarbon solvent, insoluble in water; soluble in organic solvents, used for industrial applications.
PRODUCT DETAILS
Solvent D60 (158Kg) – 3T CHEMICAL
Solvent D60 (158Kg) is a de-aromatised aliphatic hydrocarbon solvent supplied by 3T Chemical in 158 kg/phuy packaging for industrial applications. The product has insoluble in water; soluble in organic solvents.
PRODUCT INFORMATION / Introduced packaging: 158 kg/phuy. The product is a de-aromatised aliphatic hydrocarbon solvent. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is SOLVENT D60 (158KG)?
Solvent D60 (158Kg) (common names Exxsol D60; Aliphatic Solvent D60; Dung môi aliphatic, CAS 64742-47-8, formula Hỗn hợp hydrocarbon aliphatic C9–C12) is a de-aromatised aliphatic hydrocarbon solvent. It appears as colourless, clear liquid with mild hydrocarbon odour and insoluble in water; soluble in organic solvents. The flash point is about ~43–66°C (closed cup). Introduced packaging is 158 kg/phuy; origin shown on the packaging: South Korea / China. Acceptance criteria must be based on the COA of the actual batch delivered.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Solvent D60 (158Kg) |
| Common names | Exxsol D60; Aliphatic Solvent D60; Dung môi aliphatic |
| Type | De-aromatised aliphatic hydrocarbon solvent |
| CAS No. | 64742-47-8 |
| EC No. | 265-149-8 |
| Chemical formula | Hỗn hợp hydrocarbon aliphatic C9–C12 |
| Appearance | Colourless, clear liquid |
| Odour | Mild hydrocarbon odour |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | ~43–66°C (closed cup) |
| Packaging | 158 kg/phuy |
| Origin shown on packaging | South Korea / China |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Boiling range (IBP–DP) | ~186–216°C |
| Specific gravity (15°C) | ~0.78–0.79 |
| Flash point | ~43–66°C (closed cup) |
| Aromatic content | ≤ 1% |
| Aniline point | ~70–80 |
| Sulphur content | ≤ 5 ppm |
| Benzene content | ≤ 10 ppm |
| Evaporation rate (nBuAc = 1) | ~0.1 (slow) |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- De-aromatised, low odour.
- Good solvency for oils and resins.
- Medium evaporation rate.
- Very low sulphur and benzene content.
- Stable during storage.
4. Applications
4.1. Paints and Coatings
- Thinning solvent for alkyd and epoxy paints.
- Adjusts the viscosity of paint systems.
- Solvent for anti-corrosion paints.
- Thinner for powder coatings and industrial paints.
- Solvent for marine and anti-corrosion paints.
4.2. Industrial Cleaning
- Solvent for degreasing metals.
- Cleaning solvent in mechanical engineering.
- Component of industrial cleaning products.
- Solvent for cleaning metal surfaces before coating.
4.3. Other Applications
- Solvent for formulating chemical products and oilfield drilling fluids.
5. Instructions for Use
- Use according to the technical guidance of the manufacturer.
- Perform compatibility tests before large-scale use.
- Keep the container closed when not in use.
- Check labels and shelf life before use.
- Do not mix with incompatible chemicals.
6. Safety, Storage and Transportation
- Flammable product; keep away from open flame and sparks.
- Wear safety goggles, gloves and protective clothing.
- Work in a well-ventilated area and avoid inhaling vapours.
- Store in a dry, cool place with containers kept closed, away from sunlight.
- Separate from strong oxidisers.
- Do not discharge into drains or water sources.
- Prevent static build-up during transport.
- If the product enters the eyes, rinse immediately with clean water for at least 15 minutes.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of the product?
The CAS Number of the product is 64742-47-8.
• What is the chemical formula?
The chemical formula of the product is Hỗn hợp hydrocarbon aliphatic C9–C12.
• Is the product soluble in water?
The solubility of the product is insoluble in water; soluble in organic solvents.
• What packaging is available?
The introduced packaging is 158 kg/phuy; detailed information is shown on the label and the COA of each batch.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed and technical guidance should be followed before blending on a large scale.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting the relevant legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with the COA/SDS and keep a sample for inspection according to the acceptance procedure.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.
