Solvent D100
Solvent D100 166Kg as de-aromatised aliphatic hydrocarbon solvent, insoluble in water; soluble in organic solvents, used for industrial applications.
PRODUCT DETAILS
Solvent D100 (166Kg) – 3T CHEMICAL
Solvent D100 (166Kg) is a de-aromatised aliphatic hydrocarbon solvent supplied by 3T Chemical in 166 kg/phuy packaging for industrial applications. The product has insoluble in water; soluble in organic solvents.
PRODUCT INFORMATION / Introduced packaging: 166 kg/phuy. The product is a de-aromatised aliphatic hydrocarbon solvent. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is SOLVENT D100 (166KG)?
Solvent D100 (166Kg) (common names Exxsol D100; Aliphatic Solvent D100, CAS 64742-47-8, formula Hỗn hợp hydrocarbon aliphatic C10–C13) is a de-aromatised aliphatic hydrocarbon solvent. It appears as colourless, clear liquid with mild hydrocarbon odour and insoluble in water; soluble in organic solvents. The flash point is about ~64–100°C (closed cup). Introduced packaging is 166 kg/phuy; origin shown on the packaging: South Korea / China. Acceptance criteria must be based on the COA of the actual batch delivered.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Solvent D100 (166Kg) |
| Common names | Exxsol D100; Aliphatic Solvent D100 |
| Type | De-aromatised aliphatic hydrocarbon solvent |
| CAS No. | 64742-47-8 |
| EC No. | 265-149-8 |
| Chemical formula | Hỗn hợp hydrocarbon aliphatic C10–C13 |
| Appearance | Colourless, clear liquid |
| Odour | Mild hydrocarbon odour |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | ~64–100°C (closed cup) |
| Packaging | 166 kg/phuy |
| Origin shown on packaging | South Korea / China |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Boiling range (IBP–DP) | ~210–260°C |
| Specific gravity (15°C) | ~0.79–0.81 |
| Flash point | ~64–100°C (closed cup) |
| Aromatic content | ≤ 1% |
| Aniline point | ~75–85 |
| Sulphur content | ≤ 5 ppm |
| Benzene content | ≤ 10 ppm |
| Evaporation rate (nBuAc = 1) | ~0.03 (very slow) |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- Slow evaporation and high boiling point.
- De-aromatised, low odour and environmentally friendly.
- High flash point, safer to handle.
- Good solvency for oils and resins.
- Stable during storage.
4. Applications
4.1. Paints and Coatings
- Solvent for marine and anti-corrosion paints.
- Adjusts viscosity and evaporation of paint systems.
- Solvent for industrial paints.
- Solvent for maintenance paints and coatings.
- Solvent for powder and industrial coatings.
4.2. Industrial Cleaning
- Degreasing solvent in mechanical engineering.
- Cleaning solvent for equipment.
- Component of surface-treatment chemicals.
- Solvent for formulating surface-treatment and lubrication chemicals.
4.3. Other Applications
- Solvent for formulating drilling chemicals and lubricants.
5. Instructions for Use
- Use according to the technical guidance of the manufacturer.
- Perform compatibility tests before large-scale use.
- Keep the container closed when not in use.
- Check labels and shelf life before use.
- Do not mix with incompatible chemicals.
6. Safety, Storage and Transportation
- Keep away from open flame and sparks.
- Wear safety goggles and protective gloves.
- Work in a well-ventilated area.
- Store in a dry, cool place with containers kept closed.
- Separate from strong oxidisers.
- Do not discharge into drains or water sources.
- Prevent static build-up during transport.
- If the product enters the eyes, rinse immediately with clean water for at least 15 minutes.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of the product?
The CAS Number of the product is 64742-47-8.
• What is the chemical formula?
The chemical formula of the product is Hỗn hợp hydrocarbon aliphatic C10–C13.
• Is the product soluble in water?
The solubility of the product is insoluble in water; soluble in organic solvents.
• What packaging is available?
The introduced packaging is 166 kg/phuy; detailed information is shown on the label and the COA of each batch.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed and technical guidance should be followed before blending on a large scale.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting the relevant legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with the COA/SDS and keep a sample for inspection according to the acceptance procedure.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.