Propylene Glycol Monomethyl Ether Acetate (PMA)
Propylene Glycol Monomethyl Ether Acetate Pma 190Kg as glycol ether ester, slightly soluble in water; readily soluble in organic solvents, used for industrial applications.
PRODUCT DETAILS
Propylene Glycol Monomethyl Ether Acetate (Pma) (190Kg) – 3T CHEMICAL
Propylene Glycol Monomethyl Ether Acetate (Pma) (190Kg) is a glycol ether ester supplied by 3T Chemical in 190 kg/phuy packaging for industrial applications. The product has slightly soluble in water; readily soluble in organic solvents.
PRODUCT INFORMATION / Introduced packaging: 190 kg/phuy. The product is a glycol ether ester. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is PROPYLENE GLYCOL MONOMETHYL ETHER ACETATE (PMA) (190KG)?
Propylene Glycol Monomethyl Ether Acetate (Pma) (190Kg) (common names PMA; PGMEA; Propylene glycol methyl ether acetate, CAS 108-65-6, formula C6H12O3) is a glycol ether ester. It appears as colourless, clear liquid with mild, pleasant ester odour and slightly soluble in water; readily soluble in organic solvents. The flash point is about ~42°C (closed cup). Introduced packaging is 190 kg/phuy; origin shown on the packaging: China / South Korea. Acceptance criteria must be based on the COA of the actual batch delivered.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Propylene Glycol Monomethyl Ether Acetate (Pma) (190Kg) |
| Common names | PMA; PGMEA; Propylene glycol methyl ether acetate |
| Type | Glycol ether ester |
| CAS No. | 108-65-6 |
| EC No. | 203-603-9 |
| Chemical formula | C6H12O3 |
| Appearance | Colourless, clear liquid |
| Odour | Mild, pleasant ester odour |
| Solubility | Slightly soluble in water; readily soluble in organic solvents |
| Flash point | ~42°C (closed cup) |
| Packaging | 190 kg/phuy |
| Origin shown on packaging | China / South Korea |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Boiling point | ~146°C |
| Specific gravity (20°C) | ~0.966 |
| Flash point | ~42°C (closed cup) |
| Melting point | ~-67°C |
| Viscosity (25°C) | ~1.1 mPa·s |
| Purity | ≥ 99.5% |
| Water content | ≤ 0.1% |
| Acidity | ≤ 0.05 mg KOH/g |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- Strong solvency with a good polarity balance.
- Medium evaporation rate.
- Low odour and easy to use.
- Common solvent for PU and epoxy systems.
- Stable during storage.
4. Applications
4.1. Paints and Coatings
- Solvent for PU, epoxy, automotive, powder and coating systems.
- Solvent for PU, epoxy and automotive paints.
- Solvent for powder and coating systems.
- Solvent for two-component (2K) coatings.
- Solvent for adjusting viscosity and evaporation of paint systems.
4.2. Inks and Adhesives
- Solvent for printing inks.
- Solvent for adhesives and binders.
- Industrial cleaning solvent.
- Solvent for formulating circuit-board and surface-cleaning chemicals (suitable grade).
4.3. Electronics
- Solvent for formulating circuit-board chemicals (suitable grade).
5. Instructions for Use
- Use according to the technical guidance of the manufacturer.
- Perform compatibility tests before large-scale use.
- Keep the container closed when not in use.
- Check labels before use.
- Do not mix with strong oxidisers.
6. Safety, Storage and Transportation
- Flammable; keep away from open flame and sparks.
- Wear safety goggles and protective gloves.
- Work in a well-ventilated area.
- Store in a dry, cool place with containers kept closed.
- Separate from strong oxidisers.
- Do not discharge into drains or water sources.
- Prevent static build-up during transport.
- If the product enters the eyes, rinse immediately with clean water for at least 15 minutes.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of the product?
The CAS Number of the product is 108-65-6.
• What is the chemical formula?
The chemical formula of the product is C6H12O3.
• Is the product soluble in water?
The solubility of the product is slightly soluble in water; readily soluble in organic solvents.
• What packaging is available?
The introduced packaging is 190 kg/phuy; detailed information is shown on the label and the COA of each batch.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed and technical guidance should be followed before blending on a large scale.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting the relevant legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with the COA/SDS and keep a sample for inspection according to the acceptance procedure.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.