Exxsol DSP 80/100
High-purity, low-odour isoparaffinic solvent used in paints, inks, cleaners and industrial chemicals.
PRODUCT DETAILS
EXXSOL DSP 80/100 145KG – HIGH-PURITY, LOW-ODOUR ISOPARAFFINIC SOLVENT
Exxsol DSP 80/100 is a highly refined isoparaffinic solvent that is clear, nearly odourless and fast-evaporating. It suits paints, inks, cleaners, industrial chemicals and applications requiring high purity and reduced odour.
PRODUCT INFORMATION / Introduced packaging: 145 kg/drum. The product is a flammable isoparaffinic liquid. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is EXXSOL DSP 80/100 145KG?
Exxsol DSP 80/100 is an isoparaffinic hydrocarbon solvent from the ExxonMobil Exxsol range, with a boiling range of about 74–120°C and very low aromatic and sulphur content. Thanks to its high purity and very mild odour, it is widely used in coatings, inks, cleaners, household chemicals and many industrial applications requiring a clean solvent.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Exxsol DSP 80/100 |
| Common names | Exxsol D80; Isoparaffin Solvent |
| Solvent type | Isoparaffin |
| CAS No. | 64742-49-0 |
| EC No. | 265-151-9 |
| Aromatic content | < 0.1% |
| Appearance | Clear, colourless liquid |
| Odour | Very mild |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | > 5°C (closed cup) |
| Packaging | 145 kg/drum |
| Origin shown on packaging | Singapore / Korea |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Distillation range (IBP – DP) | 74 – 120°C |
| Density (15°C) | ~0.72 |
| Kinematic viscosity (25°C) | ~0.8 cSt |
| Vapour pressure (20°C) | ~6 kPa |
| Aromatic content | < 0.1% |
| Sulphur content | Very low |
| Freezing point | < -60°C |
| Colour (Saybolt) | +30 min |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- High purity with extremely low aromatic and sulphur content.
- Very mild odour for a better working environment.
- Fast evaporation suitable for quick-drying coatings and inks.
- Clear appearance with minimal effect on product colour.
- Good stability and low impurity content.
4. Applications
4.1. Paints and Inks
- Solvent for coatings, quick-drying paints and inks.
- Viscosity and evaporation control in solvent systems.
- Solvent for adhesives and binders.
- Component in cleaners and surface cleaning agents.
- Diluent for resins and additives.
4.2. Industrial Chemicals
- Solvent for household chemicals and cleaners.
- Component in drilling fluids and oilfield chemicals.
- Extraction solvent in selected processes.
- Solvent in production of chemical intermediates.
4.3. Adhesives and Materials
- Solvent for adhesives and composite materials.
5. Instructions for Use
- Use according to the technical guidance and recommended parameters of the manufacturer.
- Blend only with materials whose compatibility has been assessed.
- Perform compatibility and small-scale tests before full-scale production.
- Check shelf life, container condition and labels before use.
- Do not mix with incompatible chemicals without a technical assessment.
6. Safety, Storage and Transportation
- Wear safety goggles, gloves, antistatic clothing and appropriate equipment when transferring or handling Exxsol DSP 80/100.
- Work in a well-ventilated area, avoid vapour accumulation and prolonged skin contact.
- Store in a dry, cool warehouse; keep drums on pallets and away from direct sunlight.
- Keep containers closed when not in use; keep away from open flame, sparks, static electricity and heat sources (flammable product).
- Separate from strong oxidisers and incompatible chemicals.
- Do not discharge large quantities into drains, surface water or groundwater.
- Protect cargo from rain, secure the load, avoid static build-up and keep labels intact.
- In case of eye contact, rinse with clean water for at least 15 minutes. If large amounts of vapour are inhaled, move the person to fresh air and seek medical attention.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of
The CAS Number of the product is 64742-49-0.
• What is the chemical formula?
The chemical formula of the product is Isoparaffinic hydrocarbon mixture.
• Is Exxsol DSP 80/100 soluble in water?
The solubility is suitable for the intended application; refer to the batch TDS for specific values.
• What packaging is available?
Packaging and net weight per container are shown on the label and batch COA.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed before large-scale blending.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with COA/SDS and keep a sample for inspection.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.
