D80 Solvent
Medium-evaporating, low-odour aliphatic hydrocarbon solvent used in paints, inks, adhesives and cleaners.
PRODUCT DETAILS
MINERAL SPIRITS D80 163KG – MEDIUM-BOILING, MEDIUM-EVAPORATING LOW-ODOUR SOLVENT
Mineral Spirits D80 is a non-aromatic (aliphatic) hydrocarbon solvent with a medium boiling range, moderate evaporation rate and low odour. It is widely used in paints, inks, adhesives, cleaners and drilling fluids.
PRODUCT INFORMATION / Introduced packaging: 163 kg/drum. The product is a flammable, non-aromatic hydrocarbon liquid. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is MINERAL SPIRITS D80 (D80) 163KG?
Mineral Spirits D80 is a highly refined mixture of aliphatic hydrocarbons with a boiling range of about 207–235°C, a flash point of about 80°C and a very low aromatic content. Compared with D40, D80 evaporates more slowly and has a higher flash point, making it suitable for coating, ink and adhesive systems requiring moderate drying time and even films.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Mineral Spirits D80 (D80) |
| Common names | D80; Aliphatic Solvent D80 |
| Solvent type | Aliphatic hydrocarbons (non-aromatic) |
| CAS No. | 64742-47-8 |
| EC No. | 265-149-8 |
| Aromatic content | Very low |
| Appearance | Clear, colourless liquid |
| Odour | Mild petroleum odour |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | ~80°C (closed cup) |
| Packaging | 163 kg/drum |
| Origin shown on packaging | Korea |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Distillation range | 207 – 235°C |
| Density (20°C) | ~0.803 |
| Kinematic viscosity (20°C) | ~2.0 cSt |
| Vapour pressure (20°C) | ~0.4 kPa |
| Flash point | ~80°C |
| Freezing point | < -40°C |
| Colour (Saybolt) | +30 min |
| Sulphur content | Very low |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- Moderate evaporation rate for stable drying times.
- Extremely low aromatic content means mild odour.
- Higher flash point than D40 for safer handling.
- High purity with low evaporation residue.
- Good solvency for many resins and mineral oils.
4. Applications
4.1. Paints, Inks and Adhesives
- Solvent for alkyd, epoxy, polyurethane and oil-based paints.
- Component in printing inks and industrial cleaners.
- Solvent for adhesives and binders.
- Viscosity control in coating and solvent systems.
- Diluent for resins and additives.
4.2. Other Industrial Uses
- Solvent in drilling fluids and oilfield chemicals.
- Component in solvent-based agrochemical formulations.
- Industrial degreasing and cleaning agent.
- Extraction solvent in selected processes.
4.3. Composites
- Solvent for composite materials and common resins.
5. Instructions for Use
- Use according to the technical guidance and recommended parameters of the manufacturer.
- Blend only with materials whose compatibility has been assessed.
- Perform compatibility and small-scale tests before full-scale production.
- Check shelf life, container condition and labels before use.
- Do not mix with incompatible chemicals without a technical assessment.
6. Safety, Storage and Transportation
- Wear safety goggles, gloves, antistatic clothing and appropriate equipment when transferring or handling Mineral Spirits D80.
- Work in a well-ventilated area, avoid vapour accumulation and prolonged skin contact.
- Store in a dry, cool warehouse; keep drums on pallets and away from direct sunlight.
- Keep containers closed when not in use; keep away from open flame, sparks, static electricity and heat sources (flammable product).
- Separate from strong oxidisers and incompatible chemicals.
- Do not discharge large quantities into drains, surface water or groundwater.
- Protect cargo from rain, secure the load, avoid static build-up and keep labels intact.
- In case of eye contact, rinse with clean water for at least 15 minutes. If large amounts of vapour are inhaled, move the person to fresh air and seek medical attention.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of
The CAS Number of the product is 64742-47-8.
• What is the chemical formula?
The chemical formula of the product is Aliphatic hydrocarbon mixture.
• Is Mineral Spirits D80 soluble in water?
The solubility is suitable for the intended application; refer to the batch TDS for specific values.
• What packaging is available?
Packaging and net weight per container are shown on the label and batch COA.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed before large-scale blending.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with COA/SDS and keep a sample for inspection.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.
