D40 Solvent
Fast-evaporating, low-odour aliphatic hydrocarbon solvent used in paints, inks and industrial cleaners.
PRODUCT DETAILS
MINERAL SPIRITS D40 158KG – MEDIUM-BOILING, FAST-EVAPORATING LOW-ODOUR SOLVENT
Mineral Spirits D40 is a non-aromatic (aliphatic/isoparaffinic) hydrocarbon solvent with a medium boiling range, fast evaporation and low odour. It is widely used in paints, inks, cleaning agents, drilling fluids and many industrial applications.
PRODUCT INFORMATION / Introduced packaging: 158 kg/drum (Hanwha Total). The product is a flammable, non-aromatic hydrocarbon liquid. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is MINERAL SPIRITS D40 (D40) 158KG?
Mineral Spirits D40 is a highly refined mixture of aliphatic hydrocarbons with a boiling range of about 158–195°C, a flash point of about 40°C and a very low aromatic content. With fast evaporation and low odour, D40 is preferred in fast-drying coating systems, industrial cleaners and surface cleaning solvents.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Mineral Spirits D40 (D40) |
| Common names | D40; Aliphatic Solvent D40 |
| Solvent type | Aliphatic hydrocarbons (non-aromatic) |
| CAS No. | 64742-47-8 |
| EC No. | 265-149-8 |
| Aromatic content | Very low (< 0.1%) |
| Appearance | Clear, colourless liquid |
| Odour | Mild petroleum odour |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | ~40°C (closed cup) |
| Packaging | 158 kg/drum |
| Origin shown on packaging | Korea (Hanwha Total) |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Distillation range | 158 – 195°C |
| Density (20°C) | ~0.775 |
| Kinematic viscosity (20°C) | ~1.4 cSt |
| Vapour pressure (20°C) | ~1.2 kPa |
| Flash point | ~40°C |
| Freezing point | < -50°C |
| Colour (Saybolt) | +30 min |
| Sulphur content | Very low |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- Fast evaporation for quick surface drying.
- Extremely low aromatic content means mild odour and a better working environment.
- Stable, narrow boiling range for easy process control.
- High purity with minimal impurities and low evaporation residue.
- Good solvency for many resins and mineral oils.
4. Applications
4.1. Paints, Inks and Cleaners
- Solvent for alkyd, oil-based and fast-drying paints.
- Component in inks, adhesives and paint strippers.
- Industrial cleaning and degreasing agent.
- Surface cleaning solvent before coating.
- Diluent for resins and additives.
4.2. Other Industrial Uses
- Solvent in drilling fluids and oilfield chemicals.
- Component in solvent-based agrochemical formulations.
- Solvent in polishes and household chemicals.
- Extraction and production intermediate solvent.
4.3. Adhesives and Composites
- Solvent for adhesives and composite materials.
5. Instructions for Use
- Use according to the technical guidance and recommended parameters of the manufacturer.
- Blend only with materials whose compatibility has been assessed.
- Perform compatibility and small-scale tests before full-scale production.
- Check shelf life, container condition and labels before use.
- Do not mix with incompatible chemicals without a technical assessment.
6. Safety, Storage and Transportation
- Wear safety goggles, gloves, antistatic clothing and appropriate equipment when transferring or handling Mineral Spirits D40.
- Work in a well-ventilated area, avoid vapour accumulation and prolonged skin contact.
- Store in a dry, cool warehouse; keep drums on pallets and away from direct sunlight.
- Keep containers closed when not in use; keep away from open flame, sparks, static electricity and heat sources (flammable product).
- Separate from strong oxidisers and incompatible chemicals.
- Do not discharge large quantities into drains, surface water or groundwater.
- Protect cargo from rain, secure the load, avoid static build-up and keep labels intact.
- In case of eye contact, rinse with clean water for at least 15 minutes. If large amounts of vapour are inhaled, move the person to fresh air and seek medical attention.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of
The CAS Number of the product is 64742-47-8.
• What is the chemical formula?
The chemical formula of the product is Aliphatic hydrocarbon mixture.
• Is Mineral Spirits D40 soluble in water?
The solubility is suitable for the intended application; refer to the batch TDS for specific values.
• What packaging is available?
Packaging and net weight per container are shown on the label and batch COA.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed before large-scale blending.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with COA/SDS and keep a sample for inspection.
9. Comparing D40, D80 and D130 – which mineral spirits solvent fits your process
D40, D80 and D130 are all non-aromatic aliphatic hydrocarbon solvents (mineral spirits). They differ mainly in boiling range and evaporation rate. The figures below are taken from the typical commercial specification tables published on each product page of 3T Chemical.
| Criteria | D40 | D80 | D130 |
|---|---|---|---|
| CAS No. | 64742-47-8 | 64742-47-8 | 64742-46-7 |
| EC No. | 265-149-8 | 265-149-8 | 265-150-3 |
| Solvent type | Aliphatic hydrocarbon (non-aromatic) | Aliphatic hydrocarbon (non-aromatic) | Aliphatic hydrocarbon (non-aromatic) |
| Boiling range | 158 – 195°C | 207 – 235°C | 270 – 305°C |
| Specific gravity (20°C) | ~0.775 | ~0.803 | ~0.825 |
| Flash point | ~40°C | ~80°C | ~140°C |
| Pour point | < -50°C | < -40°C | < -20°C |
| Colour (Saybolt) | +30 min | +30 min | +30 min |
| Packaging | 158 kg/drum | 163 kg/drum | 166 kg/drum |
| Evaporation rate | Fast | Medium | Slow |
| Best suited for | Fast-drying paints, cleaners | Paints, inks, adhesives, medium drying | Coatings, inks, rust preventives, long drying |
| Origin shown on packaging | Korea (Hanwha Total) | Korea | Korea |
Note: All three sets of values are for reference only. Acceptance must be checked against the COA of the actual batch delivered. D40 evaporates fastest and suits fast-drying systems; D130 has the highest boiling point and flash point, giving thin films with good adhesion and long drying time.
Related products:
10. Quality Commitment, Delivery and Technical Support
- Acceptance criteria are based on the COA of the specific batch delivered. Reference values published on this website do not replace the COA, TDS or SDS.
- MSDS is supplied together with the delivery documents. Document retrieval and cross-checking are supported throughout the product life.
- Technical advice is given against your actual application, not only against the product catalogue.
- Drum condition, labels and shelf life are checked before dispatch; any change is notified in advance of the delivery date.
- Nationwide delivery. Contact us for a quotation based on packaging, volume and destination.
- After-sales support: blending guidance and troubleshooting for solvent-related production issues.
Request a quotation: Hotline 0938 368 327 | Email sales@ecokem.vn
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.
