Cyclohexanone (CYC)

Cyclohexanone (Cyc) (190Kg) – 3T CHEMICAL

Cyclohexanone (Cyc) (190Kg) is a cyclic ketone (ketone) supplied by 3T Chemical in 190 kg/phuy packaging for industrial applications. The product has partially soluble in water; readily soluble in organic solvents.

PRODUCT INFORMATION / Introduced packaging: 190 kg/phuy. The product is a cyclic ketone (ketone). Acceptance criteria must be based on the COA of the actual batch delivered.

1. What Is CYCLOHEXANONE (CYC) (190KG)?

Cyclohexanone (Cyc) (190Kg) (common names Cyclohexanone; CYC; Oxocyclohexane, CAS 108-94-1, formula C6H10O) is a cyclic ketone (ketone). It appears as colourless to pale-yellow liquid with characteristic, mint-like odour and partially soluble in water; readily soluble in organic solvents. The flash point is about ~44°C (closed cup). Introduced packaging is 190 kg/phuy; origin shown on the packaging: China / South Korea. Acceptance criteria must be based on the COA of the actual batch delivered.

2. Product Identification and Technical Data

Property	Information
Product name	Cyclohexanone (Cyc) (190Kg)
Common names	Cyclohexanone; CYC; Oxocyclohexane
Type	Cyclic ketone (Ketone)
CAS No.	108-94-1
EC No.	203-631-1
Chemical formula	C6H10O
Appearance	Colourless to pale-yellow liquid
Odour	Characteristic, mint-like odour
Solubility	Partially soluble in water; readily soluble in organic solvents
Flash point	~44°C (closed cup)
Packaging	190 kg/phuy
Origin shown on packaging	China / South Korea

2.1. Typical Commercial Specifications

Parameter	Typical reference
Boiling point	~155.6°C
Specific gravity (20°C)	~0.947
Flash point	~44°C (closed cup)
Melting point	~-32°C
Viscosity (25°C)	~2.2 mPa·s
Purity	≥ 99.5%
Water content	≤ 0.1%
Acidity	≤ 0.05 mg KOH/g
Other parameters	According to batch COA

TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.

3. Key Features

• Very strong solvency for many polymers and resins.
• High purity.
• Medium evaporation rate.
• Important chemical intermediate.
• Stable during storage.

4. Applications

4.1. Chemical Intermediates

• Precursor for producing caprolactam (Nylon 6) and adipic acid (Nylon 66).
• Raw material for producing caprolactam (Nylon 6).
• Raw material for producing adipic acid (Nylon 66).
• Raw material for cyclohexanone resins and chemical intermediates.
• Reaction solvent in organic synthesis.

4.2. Industrial Solvent Uses

• Solvent for paints, inks and coatings.
• Solvent for PVC, adhesives and binders.
• Industrial cleaning solvent.
• Solvent in the production of crop-protection products.

4.3. Other Applications

• Solvent in the production of crop-protection products and chemicals.

5. Instructions for Use

• Use according to the technical guidance of the manufacturer.
• Perform compatibility tests before large-scale use.
• Keep the container closed when not in use.
• Check labels before use.
• Do not mix with strong oxidisers.

6. Safety, Storage and Transportation

• Flammable; keep away from open flame and sparks.
• Wear safety goggles and protective gloves.
• Work in a well-ventilated area.
• Store in a dry, cool place with containers kept closed.
• Separate from strong oxidisers.
• Do not discharge into drains or water sources.
• Avoid prolonged skin contact.
• If the product enters the eyes, rinse immediately with clean water for at least 15 minutes.

7. Selection and Acceptance Criteria

• Verify the COA of the actual delivered batch against the technical requirements.
• Check appearance, colour, clarity and visible impurities.
• Check container condition, seals, labels and traceability information.
• Review the SDS for storage and emergency handling.
• Check homogeneity, water-insoluble matter and batch-specific parameters.

8. Frequently Asked Questions