Cyclohexane
Cyclohexane 156Kg as saturated cyclic hydrocarbon (cycloaliphatic), insoluble in water; soluble in organic solvents, used for industrial applications.
PRODUCT DETAILS
Cyclohexane (156Kg) – 3T CHEMICAL
Cyclohexane (156Kg) is a saturated cyclic hydrocarbon (cycloaliphatic) supplied by 3T Chemical in 156 kg/phuy packaging for industrial applications. The product has insoluble in water; soluble in organic solvents.
PRODUCT INFORMATION / Introduced packaging: 156 kg/phuy. The product is a saturated cyclic hydrocarbon (cycloaliphatic). Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is CYCLOHEXANE (156KG)?
Cyclohexane (156Kg) (common names Cyclohexane; Hexahydrobenzene, CAS 110-82-7, formula C6H12) is a saturated cyclic hydrocarbon (cycloaliphatic). It appears as colourless, clear liquid with mild characteristic hydrocarbon odour and insoluble in water; soluble in organic solvents. The flash point is about -20°C (closed cup). Introduced packaging is 156 kg/phuy; origin shown on the packaging: China / South Korea. Acceptance criteria must be based on the COA of the actual batch delivered.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Cyclohexane (156Kg) |
| Common names | Cyclohexane; Hexahydrobenzene |
| Type | Saturated cyclic hydrocarbon (Cycloaliphatic) |
| CAS No. | 110-82-7 |
| EC No. | 203-806-2 |
| Chemical formula | C6H12 |
| Appearance | Colourless, clear liquid |
| Odour | Mild characteristic hydrocarbon odour |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | -20°C (closed cup) |
| Packaging | 156 kg/phuy |
| Origin shown on packaging | China / South Korea |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Boiling range | ~80.7°C |
| Specific gravity (20°C) | 0.779 |
| Freezing point | ~6.5°C |
| Flash point | -20°C (closed cup) |
| Viscosity (20°C) | ~0.94 mPa·s |
| Water content | ≤ 0.02% |
| Benzene content | ≤ 0.1% |
| Purity | ≥ 99.5% |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- Excellent solvency for oils, resins and fats.
- Low boiling point, fast evaporation and easy removal.
- High purity with low impurities.
- Used as a raw material for Nylon production (KA oil).
- Broad compatibility with many solvent systems.
4. Applications
4.1. Nylon Raw Material
- Precursor for producing cyclohexanone/cyclohexanol (KA Oil) for Nylon 6 and Nylon 66.
- Raw material for producing caprolactam (Nylon 6).
- Raw material for producing adipic acid (Nylon 66).
- Feedstock for KA Oil (cyclohexanone/cyclohexanol mixture).
- Precursor for producing adiponitrile and hexamethylenediamine (Nylon 66).
4.2. Industrial Solvent Uses
- Solvent for paints, varnishes and printing inks.
- Diluent for adhesives and binders.
- Extraction solvent for vegetable oils and essential oils.
- Solvent in rubber production.
4.3. Laboratory
- Solvent for titration, extraction and equipment rinsing in analysis.
5. Instructions for Use
- Use according to the technical guidance and recommended parameters of the manufacturer.
- Blend only with materials whose compatibility has been assessed.
- Perform small-scale tests before full-scale production.
- Check shelf life, container condition and labels before use.
- Do not mix with strong oxidisers without a technical assessment.
6. Safety, Storage and Transportation
- Flammable product; keep away from open flame, sparks and static electricity.
- Wear safety goggles, gloves and antistatic clothing when handling.
- Work in a well-ventilated area and avoid inhaling solvent vapours.
- Store in a dry, cool place with containers kept closed, away from sunlight.
- Separate from strong oxidisers and incompatible chemicals.
- Do not discharge large quantities into drains or water sources.
- Secure the load and prevent static build-up during transport.
- If large amounts of vapour are inhaled, move to fresh air; if the product enters the eyes, rinse immediately with clean water for at least 15 minutes.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of the product?
The CAS Number of the product is 110-82-7.
• What is the chemical formula?
The chemical formula of the product is C6H12.
• Is the product soluble in water?
The solubility of the product is insoluble in water; soluble in organic solvents.
• What packaging is available?
The introduced packaging is 156 kg/phuy; detailed information is shown on the label and the COA of each batch.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed and technical guidance should be followed before blending on a large scale.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting the relevant legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with the COA/SDS and keep a sample for inspection according to the acceptance procedure.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.
