Aromatic Solvent S-200

AROMATIC SOLVENT S-200 200KG – HIGH-BOILING AROMATIC SOLVENT WITH STRONG SOLVENCY FOR RESINS AND OILS

Aromatic Solvent S-200 is a high-boiling aromatic hydrocarbon solvent with strong solvency for resins, oils and polymers. It is widely used in paints, inks, adhesives, agrochemicals and industrial products requiring a high-boiling solvent.

PRODUCT INFORMATION / Introduced packaging: 200 kg/drum. The product is a high-boiling, flammable aromatic hydrocarbon liquid. Acceptance criteria must be based on the COA of the actual batch delivered.

1. What Is AROMATIC SOLVENT S-200 200KG?

Aromatic Solvent S-200 is a mixture of C9–C13 aromatic hydrocarbons in the Heavy Aromatic Solvent Naphtha category, produced by distillation and refining of aromatic-rich petroleum fractions. Thanks to its high aromatic content, S-200 offers strong solvency for alkyd, epoxy, acrylic resins and mineral oils, with a slow evaporation rate and a higher flash point than light aromatic solvents.

2. Product Identification and Technical Data

Property	Information
Product name	Aromatic Solvent S-200
Common names	Heavy Aromatic Solvent Naphtha; Solvent Naphtha (petroleum)
Solvent type	C9–C13 aromatic hydrocarbons
CAS No.	64742-94-5
EC No.	265-198-5
Aromatic content	≥ 98%
Appearance	Clear, colourless to light yellow liquid
Odour	Characteristic mild aromatic odour
Solubility	Insoluble in water; soluble in organic solvents
Flash point	≥ 90°C (closed cup)
Packaging	200 kg/drum
Origin shown on packaging	China / Korea

2.1. Typical Commercial Specifications

Parameter	Typical reference
Distillation range (ASTM D86)	215 – 290°C
Density (20°C)	0.950 – 0.990
Mixed aniline point	Low (high solvency)
Colour (Saybolt)	+30 min
Benzene content	Very low
Evaporation rate (nBuAc = 1)	Very slow
Kauri-Butanol (KB) value	High
Sulphur content	Very low
Other parameters	According to batch COA

TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.

3. Key Features

• High aromatic content provides strong solvency for resins, oils and polymers.
• High boiling range and slow evaporation give smooth, even and well-adhered films.
• Higher flash point than light aromatic solvents for safer handling and storage.
• Very low benzene and sulphur content.
• Good stability with minimal change under proper storage conditions.

4. Applications

4.1. Paints and Coatings

• Solvent for alkyd, epoxy, polyurethane and oil-based paints.
• Solvent blending in marine and anti-corrosion coatings.
• Viscosity and evaporation control in industrial coating systems.
• Solvent in oil-based printing inks and adhesive systems.
• Diluent for alkyd and hydrocarbon resins.

4.2. Agrochemicals and Oilfield Chemicals

• Solvent for emulsifiable concentrate (EC) pesticide formulations.
• Solvent for oilfield treatment chemicals and drilling additives.
• Component in industrial cleaners and degreasers.
• Solvent in production of chemical intermediates.

4.3. Adhesives and Composites

• Solvent for adhesives, binders and composite materials.

5. Instructions for Use

• Use according to the technical guidance and recommended parameters of the manufacturer.
• Blend only with materials whose compatibility has been assessed.
• Perform compatibility and small-scale tests before full-scale production.
• Check shelf life, container condition and labels before use.
• Do not mix with incompatible chemicals without a technical assessment.

6. Safety, Storage and Transportation

• Wear safety goggles, gloves, antistatic clothing and appropriate equipment when transferring or handling Aromatic Solvent S-200.
• Work in a well-ventilated area, avoid vapour accumulation and prolonged skin contact.
• Store in a dry, cool warehouse; keep drums on pallets and away from direct sunlight.
• Keep containers closed when not in use; keep away from open flame, sparks, static electricity and heat sources (flammable product).
• Separate from strong oxidisers and incompatible chemicals.
• Do not discharge large quantities into drains, surface water or groundwater.
• Protect cargo from rain, secure the load, avoid static build-up and keep labels intact.
• In case of eye contact, rinse with clean water for at least 15 minutes. If large amounts of vapour are inhaled, move the person to fresh air and seek medical attention.

7. Selection and Acceptance Criteria

• Verify the COA of the actual delivered batch against the technical requirements.
• Check appearance, colour, clarity and visible impurities.
• Check container condition, seals, labels and traceability information.
• Review the SDS for storage and emergency handling.
• Check homogeneity, water-insoluble matter and batch-specific parameters.

8. Frequently Asked Questions