D130 Solvent
High-boiling, slow-evaporating low-odour aliphatic hydrocarbon solvent used in paints, inks, adhesives and rust preventives.
PRODUCT DETAILS
MINERAL SPIRITS D130 166KG – HIGH-BOILING, SLOW-EVAPORATING LOW-ODOUR SOLVENT
Mineral Spirits D130 is a non-aromatic (aliphatic) hydrocarbon solvent with a high boiling range and a slow evaporation rate. It suits coating, ink, adhesive and industrial systems requiring a high-boiling solvent.
PRODUCT INFORMATION / Introduced packaging: 166 kg/drum. The product is a flammable, non-aromatic hydrocarbon liquid. Acceptance criteria must be based on the COA of the actual batch delivered.
1. What Is MINERAL SPIRITS D130 (D130) 166KG?
Mineral Spirits D130 is a highly refined mixture of aliphatic hydrocarbons with a boiling range of about 270–305°C, a flash point of about 140°C and a very low aromatic content. Thanks to its high boiling point and slow evaporation, D130 is used in coatings, inks, adhesives and rust-preventive products that require long open time and good film adhesion.
2. Product Identification and Technical Data
| Property | Information |
|---|---|
| Product name | Mineral Spirits D130 (D130) |
| Common names | D130; Aliphatic Solvent D130 |
| Solvent type | Aliphatic hydrocarbons (non-aromatic) |
| CAS No. | 64742-46-7 |
| EC No. | 265-150-3 |
| Aromatic content | Very low |
| Appearance | Clear, colourless liquid |
| Odour | Mild petroleum odour |
| Solubility | Insoluble in water; soluble in organic solvents |
| Flash point | ~140°C (closed cup) |
| Packaging | 166 kg/drum |
| Origin shown on packaging | Korea |
2.1. Typical Commercial Specifications
| Parameter | Typical reference |
|---|---|
| Distillation range | 270 – 305°C |
| Density (20°C) | ~0.825 |
| Kinematic viscosity (20°C) | ~4.0 cSt |
| Vapour pressure (20°C) | Very low |
| Flash point | ~140°C |
| Freezing point | < -20°C |
| Colour (Saybolt) | +30 min |
| Sulphur content | Very low |
| Other parameters | According to batch COA |
TECHNICAL NOTICE / The values in this document are provided for reference only and do not replace the TDS, SDS or COA. Acceptance must be verified against the documentation of the actual delivered batch.
3. Key Features
- High boiling point and slow evaporation for long-drying systems.
- High flash point for safer storage and transportation.
- Extremely low aromatic content means mild odour.
- High purity with low evaporation residue.
- Good solvency for many resins and mineral oils.
4. Applications
4.1. Paints, Inks and Rust Preventives
- Solvent for high-boiling alkyd, epoxy and polyurethane coatings.
- Component in inks, rust preventives and lubricants.
- Solvent for adhesives and binders.
- Viscosity control in coating and solvent systems.
- Diluent for resins and additives.
4.2. Other Industrial Uses
- Solvent in oilfield chemicals and drilling fluids.
- Component in industrial cleaners and degreasers.
- Solvent for selected pharmaceutical and chemical processes.
- Industrial extraction solvent.
4.3. Composites
- Solvent for composite materials and speciality resins.
5. Instructions for Use
- Use according to the technical guidance and recommended parameters of the manufacturer.
- Blend only with materials whose compatibility has been assessed.
- Perform compatibility and small-scale tests before full-scale production.
- Check shelf life, container condition and labels before use.
- Do not mix with incompatible chemicals without a technical assessment.
6. Safety, Storage and Transportation
- Wear safety goggles, gloves, antistatic clothing and appropriate equipment when transferring or handling Mineral Spirits D130.
- Work in a well-ventilated area, avoid vapour accumulation and prolonged skin contact.
- Store in a dry, cool warehouse; keep drums on pallets and away from direct sunlight.
- Keep containers closed when not in use; keep away from open flame, sparks, static electricity and heat sources (flammable product).
- Separate from strong oxidisers and incompatible chemicals.
- Do not discharge large quantities into drains, surface water or groundwater.
- Protect cargo from rain, secure the load, avoid static build-up and keep labels intact.
- In case of eye contact, rinse with clean water for at least 15 minutes. If large amounts of vapour are inhaled, move the person to fresh air and seek medical attention.
7. Selection and Acceptance Criteria
- Verify the COA of the actual delivered batch against the technical requirements.
- Check appearance, colour, clarity and visible impurities.
- Check container condition, seals, labels and traceability information.
- Review the SDS for storage and emergency handling.
- Check homogeneity, water-insoluble matter and batch-specific parameters.
8. Frequently Asked Questions
• What is the CAS Number of
The CAS Number of the product is 64742-46-7.
• What is the chemical formula?
The chemical formula of the product is Aliphatic hydrocarbon mixture.
• Is Mineral Spirits D130 soluble in water?
The solubility is suitable for the intended application; refer to the batch TDS for specific values.
• What packaging is available?
Packaging and net weight per container are shown on the label and batch COA.
• Can it be blended with other solvents or chemicals?
Compatibility tests should be performed before large-scale blending.
• Does it require special storage?
Store in a dry, cool place, away from heat, flame and direct sunlight as recommended.
• Can industrial grade be used in food or cosmetics?
Only use grades certified for the intended application and meeting legal requirements.
• What if the quality of a batch is in doubt?
Contact the technical team, compare with COA/SDS and keep a sample for inspection.
3T CHEMICAL COMPANY LIMITED
Dear Valued Customers, are you looking for reliable chemical sourcing solutions?
Please contact 3T Chemical for consultation on suitable products, packaging specifications, COA/MSDS documentation, and appropriate delivery solutions.
